Electronics Corp.
CONTACT FRAMES & SUPPLIES
Cleaning Kit
Contains one pair of nylon gloves and one 6 x 9.5" Scotch Brite Pad. Uncoated Copper Clad Boards should be cleaned before processing. Etched boards should be cleaned after processing. Avoid fingerprints and remove impurities from the board using the Scotch Brite Pad.
| Cat. # | Price |
| PC-CK | 4.12 |
PC 50A Reusable Exposure Guide for Positively Sensitized Boards
We at Injectorall make the finest positive pre-sensitized copper laminated printed circuit boards. But they can only be the finest if you make the proper exposure, development, and etching.This reusable exposure guide is to aid you in exposing your board properly.
| Cat. # | Price |
| PC50A | 3.98 |
Instructions for PC 50A Reusable Exposure Guide
Glass Exposure Kits
An inexpensive contact frame consisting of 2 pieces of glass and 4 spring clips
| Cat. # | Sizes | Price |
| PC-GL46 | 4X6" | 5.32 |
| PC-GL69 | 6X9" | 8.65 |
| PC-GL1218 | 12X18" | 23.25 |
Drafting Knives
High grade steel blade pressed into an aluminum tubing handle. Use for cutting stencils, drafting aids, strippable film, or just cutting or trimming.
| Cat. # | Description | Price |
| PC-KN | DRAFTING KNIFE | 2.40 |
| PC-KN-12 | DRAFTING KNIVES | 22.38 |
Scotch Brite Pad
Use for removing fingerprints, unwanted resists and other impurities from copper clad boards.
| Cat. # | Sizes | Price |
| PC-SB | 6 X 9.5" | 2.00 |
631-563-3388
631-563-3389
110 Keyland Court, Bohemia, NY 11716
800-878-7227
General Information: injectorall@mindspring.com
Copyright © 2003 Injectorall Electronics Corp.
visitors to this page since Last Modified: December 04, 2008