Electronics Corp.
ETCHANTS
Injectorall ETCHANT is a ferric chloride solution to remove excess copper from printed circuit boards. It is an electronic-grade solution from which impurities have been carefully removed to meet the most stringent requirements of the electronic industry. It is packaged in a plastic bottle. The specific gravity is 42 degrees.
| Cat. # | Quantity | Price |
| PC199-6 | 6 OZ. | 3.00 |
| PC199P | 1 PINT | 6.00 |
| PC199Q | 1 QUART | 10.00 |
| PC199G | 1 GALLON | 35.00 |
Ferric Chloride Material Safety Data Sheet ( MSDS Sheet )
Injectorall SODIUM PERSULFATE comes in crystal form. One half-pound container is mixed with one gallon of distilled or filtered water. This solution is used to remove excess copper from printed circuit boards. It does not migrate out of solution as ferric chloride does and therefore does not stain your work area. Sodium Persulfate is also a cost-effective alternative to Ferric Chloride.
| Cat. # | Quantity | Price |
| PC200 | 1/2 LB. | 6.68 |
| PC200-10 | 10 LB. | 83.35 |
Sodium Persulfate Material Safety Data Sheet (MSDS Sheet)
Sodium Persulfate Instruction Sheet (PC 200)
631-563-3388
631-563-3389
110 Keyland Court, Bohemia, NY 11716
800-878-7227
General Information: injectorall@mindspring.com
Copyright © 2003 Injectorall Electronics Corp.
visitors to this page since Last Modified: March 10, 2008